Tensioning and cutting the Panduit metal clamps for the correct fastening of the bearing boots has always been a very uncomfortable task to carry out because it’s an area of difficult maneuverability. However, with the STC tool (Code T402236) it will be a quick, safe and easy task to perform: insert the metal strip into the pliers guide, tension, and cut.
Finally there is a solution for Common Rail injectors
Designed to repair the diesel injectors, we have a kit of clamps and accessories with everything you need neatly arranged in a box (Code T406861), and a seal extractor (Code T439403), a sharp and threaded tool so that screw into the center of the washer and with a sliding hammer to break the seal between the washer and the cylinder head, allowing extraction.
Universal metal-rubber seal o-ring kit for oil sumps
Kit consisting of 170 rubber and metal and rubber O-rings (Code T406864), of 10 different universal sizes. When you run out of one of the items, you can easily replace it without buying the whole box. All the items can be in fact purchased separately. These gasket washers consisting of rubber on the inside of the thread, and metal on the outside edge, are used to securely seal the tap on of the oil sump. This reduces the risk of oil leakage.
Kit boxes of O-rings, washers, cotter pins and piers
These STC solutions are designed to facilitate the work of mechanics in their workshops, and that they have all the accessories at hand and well organized. The boxes have dividers and a sheet in which each piece is detailed, with its own part numbers, measurements, and an identifying photo. Discover them all and find the one you need. Codes: T406733, T406734, T406735, T406736, T406737, T406738, T406739, T406740, T406741, T406742, T406743 and T406744.
Pliers to mounting clamps with torque
Metalcaucho offers two options to assist in the mounting of clamps on the bearing boots. Code T442296 is ideal for quickly and easily attaching the clamps, as it has a metal flange to prevent kickback. For its part, the code T442297 allows an opening between edge and edge of up to 35 mm, and the tightening torque is set using a ratchet wrench, to minimize the force that must be exerted.
Tools for quick mounting of boots
STC offers two options to help in the assembly of boots: pneumatic clamps (Code T443522) and plastic cones (Codes T400010, T400011 and T400013). The clamps work with an air compressor and allow you to expand the boots. The plastic cones require a good greasing so that the rubber of the boots is widened manually until the cone passes and is placed in position. With these two tools you will save time and avoid problems.
STC’s range of solutions continues to grow.
We help you avoid unnecessary efforts and optimize your valuable time in the mechanical workshop.
Fondata nel 2000, STC è un’azienda che si occupa della progettazione, produzione e distribuzione di ricambi e accessori in gomma e metallo di marchi automobilistici nazionali e internazionali. Si è sempre contraddistinta per la sua alta qualità, il livello di servizio e la disponibilità in stock.